LA10PV...LA50PV - aluminium foil absorption sheet
Material: polyether or polyester foam.
Thickness: 10...50 mm.
Facing : aluminised polyester film.
Sheet size: 1000 x 1500 mm.
Method of installation: self-adhesive backing or mechanical
installation.
|
 |
LRP10PV...LRP50PV - aluminium foil faced absorption sheet
Material: recycled foam (bonded foam).
Thickness: 10...50 mm.
Facing : aluminised polyester film (PV), black polyurethane film (MV),
non-woven fabric (KK) or light coloured plastic film (VV).
Sheet size: 500 x 1000 mm or 1000 x 2000 mm.
Method of installation: self-adhesive backing or manual
installation.
|
 |
ST...R - barrier mats
Material: bitumen.
Thickness: 2 mm (ST3R) or 4 mm (ST7R).
Surface mass: 3 kg/m2 (ST3R) or 7 kg/m2 (ST7R).
Colour: black.
Sheet size: 1000 x 1230 mm or 1000 x 1500 mm.
Method of installation: self-adhesive backing.
|
 |
LA10KN7A10PV
(MV, VV)...LA10KN7A30PV (MV, VV) - faced multi-layer sheet
Material: barrier mat between two layers of polyether foam.
Thickness: 22...44 mm.
Facing: aluminised polyester film (PV), black polyurethane
film (MV) or white plastic film (VV).
Sheet size: 1200 x 1500 mm.
Method of installation: self-adhesive backing or mechanical
installation.
Example uses of this material include insulation of boat engines and machine
units.
|
 |
BL - wall coverings
Material: vinyl foam.
Thickness: 3 mm.
Surface mass: approx. 800 g/m2.
Roll size: 1500 x 25000 mm.
Adhesive recommendation: contact adhesive according to
adhesive manufacturer's instructions.
Light coloured BL wall coverings are suitable for boat
interior upholstery and classified self-extinguishing when tested to standard
FMVSS302 (ISO 3795).
BL-products are elastic and thus easy to upholster curved
surfaces and corners with.
|
 |